$1239-15260 /Piece/Pieces
| Payment Type: | L/C,T/T,D/P,D/A,Paypal,Money Gram,Western Union |
| Incoterm: | FOB,CFR,CIF,EXW,DDP |
| Min. Order: | 1 Piece/Pieces |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shanghai,Qingdao,Yiwu |
Model No.: Stainless Steel Submersible Pump
Brand: SLAPK
| Selling Units | : | Piece/Pieces |
| Package Type | : | Stainless steel submersible pump is packed with seaworthy export standard plywood case |
| Download | : |
|
QJ series submersible pumps includng QJ deep well (borehole) submersible pumps, QJH stainless steel submersible pumps , QJT bottom-suction submersible pumps and QJR hot water submersible pumps . These series of submersiable pumps are mainly used in drawing water from well , river, sea and lake, farmland/spray irrigaion, aquaculture, water supply or drainage system for cities, industrial and mine establishements, drawing water from hot spring, fountain projects and so on.
Use Conditions:
1. The three-phase power supply voltage deviation does not exceed ±5% and the frequency deviation is not more than ±1%；
2. Motor cavity must be filled fullly with clean water during operation.
3. The first stage impeller of the pump shall be immersed at least 2 meters below the dynamic water level. The pump unit shall not be more than 70 meters below the static water level. The bottom of the motor shall not be less than 3 meters from the bottom of the well.
4. Ensure the source of water is enough for pump operating continuously.
5. If it is used in pool, should add guide tube fro pump motor in order to cooling.
The Stainless Steel Submersible Pump main part material is as below:
(1). Submersible motor: SS304, SS316, SS316L, duplex stainless steel, and SS904L
(2). Submersible impeller: SS304, SS316, SS316L, duplex stainless steel and SS904L
(3). Screw and nuts: SS316L, duplex stainless steel and SS904L
(4). Pump shaft: 45#steel, 2CR13,3CR13, duplex stainless steel
(5). Bearing: rubber
(6). Pump bowl: SS304, SS316, SS316L, duplex stainless steel, and SS904L
Stainless steel Submersible Pump using conditions:
1. Motor cavity must be filled fully with clean water during operation;
2. The first stage impeller of the pump shall be immersed at least 2 meters below the dynamic water level. The stainless steel water submersible pump unit shall not be more than 120 meters below the static water level. The bottom of the motor shall not be less than 5 meters from the bottom of the well.
Stainless steel submersible pump models:
(Notice: Flow rate, head meters, motor power and materials, ODM OEM is available. SS304, SS316, SS316L,duplex stainless steel and SS904L)
| Model | Motor Power | Flow rate | Head meters | Outlet diameter | |
| QJH type | kw | hp | m3/h | m | Inch(") |
| 200QJH20-135/10 | 15 | 20 | 20 | 135 | 2" |
| 200QJH20-175/13 | 18.5 | 25 | 20 | 175 | 2" |
| 200QJH20-202/15 | 22 | 30 | 20 | 202 | 2" |
| 200QJH20-283/21 | 30 | 40 | 20 | 283 | 2" |
| 200QJH20-338/25 | 37 | 50 | 20 | 338 | 2" |
| 200QJH25-182/13 | 22 | 30 | 25 | 182 | 2" |
| 200QJH25-294/21 | 37 | 50 | 25 | 294 | 2" |
| 200QJH32-104/8 | 18.5 | 25 | 32 | 104 | 3" |
| 200QJH32-144/9 | 22 | 30 | 32 | 144 | 3" |
| 200QJH32-195/15 | 30 | 40 | 32 | 195 | 3" |
| 200QJH32-234/18 | 37 | 50 | 32 | 234 | 3" |
| 200QJH40-117/9 | 22 | 30 | 40 | 117 | 3" |
| 200QJH40-208/16 | 37 | 50 | 40 | 208 | 3" |
| 200QJH50-78/6 | 18.5 | 25 | 50 | 78 | 3" |
| 200QJH50-91/7 | 22 | 30 | 50 | 91 | 3" |
| 200QJH63-112/8 | 30 | 40 | 63 | 112 | 3" |
| 200QJH80-44/4 | 15 | 20 | 80 | 44 | 4" |
| 200QJH80-88/8 | 30 | 40 | 80 | 88 | 4" |
| 200QJH100-75/5 | 37 | 50 | 100 | 75 | 4" |
| 250QJH50-80/4 | 18.5 | 25 | 50 | 80 | 3" |
| 250QJH50-340/17 | 75 | 100 | 50 | 340 | 3" |
| 250QJH63-60/3 | 18.5 | 25 | 63 | 60 | 3" |
| 250QJH63-100/5 | 30 | 40 | 63 | 100 | 3" |
| 250QJH63-260/13 | 75 | 100 | 63 | 260 | 3" |
| 250QJH100-72/4 | 30 | 40 | 100 | 72 | 4" |
| 250QJH125-128/8 | 75 | 100 | 125 | 128 | 5" |
| 250QJH160-105/7 | 75 | 100 | 160 | 105 | 5" |
| 300QJH200-20/1 | 18.5 | 25 | 200 | 20 | 6" |
| 300QJH240-22/1 | 22 | 30 | 240 | 22 | 6" |
| 300QJH300-20/1 | 25 | 35 | 300 | 20 | 6" |
| 300QJH300-40/2 | 55 | 75 | 300 | 40 | 6" |
| 300QJH300-60/3 | 75 | 100 | 300 | 60 | 6" |
| 300QJH300-80/4 | 110 | 150 | 300 | 80 | 6" |
| 300QJH300-100/5 | 140 | 190 | 300 | 100 | 6" |
| 300QJH300-120/6 | 160 | 220 | 300 | 120 | 6" |
| 300QJH300-140/7 | 185 | 250 | 300 | 140 | 6" |
| 300QJH300-160/8 | 220 | 300 | 300 | 160 | 6" |
| 350QJH320-40/2 | 63 | 85 | 320 | 40 | 8" |
| 350QJH320-90/3 | 140 | 190 | 320 | 90 | 8" |
| 350QJH320-120/4 | 185 | 250 | 320 | 120 | 8" |
| 400QJH400-50/1 | 90 | 120 | 400 | 50 | 8" |
| 450QJH500-80/2 | 185 | 250 | 500 | 80 | 8" |
| 450QJH800-16/1 | 75 | 100 | 800 | 16 | 12" |
| 450QJH1000-16/1 | 90 | 120 | 1000 | 16 | 12" |
| 500QJH640-56/2 | 185 | 250 | 640 | 56 | 10" |
| 550QJH1200-18/1 | 110 | 150 | 1200 | 18 | 16" |
| 600QJH800-50/2 | 220 | 300 | 800 | 50 | 12" |
| 600QJH800-75/3 | 300 | 400 | 800 | 75 | 12" |
| 600QJH1000-20/1 | 110 | 150 | 1000 | 20 | 12" |
| 600QJH1000-40/2 | 220 | 300 | 1000 | 40 | 12" |
| 600QJH1000-60/3 | 300 | 400 | 1000 | 60 | 12" |
We have 36 sole duty quality control staffs. Among processional staffs are put in charge of Rotor dynamic balance testing; Impeller static balance testing; Motor winding withstand voltage testing; Hydrostatic pressure testing of pressure bearing parts.
Stainless steel submersible pump applications:
1. Farmland irrigation, spray irrigation
2. Fountain projects
4. Drawing clean water for drinking, SS304 will be available with competitive price and anti corrosive
5. Water supply and drainage system for industrial or civil buildings
9. Sea water, salt water, offshore,jack-up, floating dock,shipyard, mariclture
10. Heating for warmth, health care, earth energy utilization
11. Drain water from mines
FAQ
Q:How long is warranty?
A:About 12 months.
Q:How long is production lead time?
A: Normal production is about 10-25 days.
Q:What’s type of shipping?
A:Usually by sea, and will be based on the customer's destination to choose the most favorable and most appropriate way.
Q:What is the shipping terms you can provide?
A:Depends on customer's requirements, we can provide different transportation terms,
such as EXW, FOB, CIF, DDP.
Q:How can I pay for my items? What is the payment you can provide?
A:Usually by T/T, 50% down payment once PI confirmed, the balance will be paid after inspection and before shipment. L/C at sight.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now
