20hp Submersible Water Pump

20HP Submersible Motor

20HP water submersible motor is water filled 3 Phase induction motor that is designed for driving water Submersible Pump in reliable quality. The APK motor is water proof design. All conductors of squirrel-cage of the rotor are made of pure copper bars. And the stator winding is using water proof wires. The thrust bearing is made from special plastic or graphite and thrusts lubricated and cooled by water. This ensured durable operation with heavy load.

Standard Supply:

Outer diameter:   6″ and  8″ on demand.
Basic Rated voltage:   380 VAC @ 50Hz
Protection Grade:   IP68
Speed:   2 Poles
Body Material:   Normal Steel or Stainless Steel.
Length of leading cable:   3M
Seal:   Mechanical Seal

Standard Operating Conditions:

Installation Position:   Vertical
Surround Water Temperature: Less than 30°C
Max. Voltage Tolerance:   +6% / -10%.
Maximum Frequency Tolerance:  ±1%.
Water Quality:   Sand content (weight ration) in water should not exceed 0.01% , chlorine ion content should not be over 400mg/L.
Water PH Value: 6.5 – 8.5
Liquid Inside:   Clean water or Anti-freezing. Mixture liquid filled into motor before operation.
Min. Cooling water flow:   20cm/s for motors up to 18.5 Kw and 50cm/s for the above.

Product Features:

Wide power extension for each size.
Mounting dimensions completely according to NEMa standard.
Leading design and no pollution for environment.
High quality Thrust bearings made from special plastic or graphite ensured long life.
High efficiency electrical design gives lower operation cost.
Good Service quality.
Sand slinger and shaft seal for protecting motor well.
Strict inspection system and all motors 100% tested before delivery.

20hp submersible pump models:

(Notice: Flow rate, head meters, motor power and materials, a available 20hp submersible pump will be chose. Inquiry, please)

Model	Power		Flow	Head	Outlet Diameter	Pump dia
QJ type	kw	hp	m3/h	m	Inch(")	mm
200QJ20-135/10	15	20	18-22	115-156	2"	184
200QJ20-148/11	15	20	18-22	126-170	2"	184
200QJ25-126/9	15	20	23-27	100-145	2"	184
200QJ32-91/7	15	20	29-35	73-108	3"	184
200QJ40-78/6	15	20	37-43	67-93	3"	184
200QJ50-90/6	15	20	46-54	48-72	3"	184
200QJ63-56/4	15	20	58-68	60-82	3"	184
200QJ80-44/4	15	20	74-86	37-50	4"	184
200QJ100-30/2	15	20	80-120	26-32	4"	184
250QJ50-60/3	15	20	46-54	51-69	4"	233
250QJ80-40/2	15	20	74-86	34-46	4"	233
250QJ100-36/2	15	20	80-120	32-42	4"	233

10 sets 50m3/h 65m 20hp 15kw 380v 50hz deep well water submersible pump, deliver to Jakarta, Indonesia, focused on saleing submersible water pumps. 

Water submersible pump installed diagram:

1. How to circulate head means (TDH):

To calculate Total Dynamic Head, also known as TDH, we need to calculate three things:

A) The Vertical Rise.

B) The Friction Losses of all the pipe and components the liquid encounters on the discharge of the pump.

C) After calculating both, add them together to calculate TDH.

Water Submersible Pump Applications:

1. Ground underground water pumping

2. Farmland agricultural irrigation system

3. Sea water, shipyard, offshore, boat ship, mariculture, floating dock, salt water

4. Drawing water from deep well or borehole

5. Pumping water from lake, river, vessel, tank, reservoir

6. Fountain projects: horizontal installed